Henan E-Grind Abrasives Co., Ltd.
Poly (Polycrystalline Diamond Powder)

Poly (Polycrystalline Diamond Powder)

Poly (Polycrystalline Diamond Powder)
Poly (Polycrystalline Diamond Powder)
Poly (Polycrystalline Diamond Powder)

Properties

  • Detonation-synthesized polycrystalline diamond micro-powder
  • The structure resembles the rare natural polycrystalline black diamond, metallic-grey, superior toughness, self-sharpening.
  • The lapping and polishing efficiency of the detonation-synthesized polycrystalline diamond micro-powder is 2 to 4 times better compared with that of the mono-crystalline diamond that is naturally occurred or synthesized via the static pressure method, Silicon Nitride, Corundum, and other abrasive materials.
  • Polycrystalline diamond micro-powder allows the manufacturing of the smoothest surface possible:
a. When using polycrystalline diamond micro-powder of size 2-4micron to the polishing surface, Ra (roughness) < 1.6nm
b. When using polycrystalline diamond micro-powder of size 0-0.5micron to the polishing surface, Ra (roughness) < 1.3-1.4nm
c. When using polycrystalline diamond micro-powder of size 0-0.125micron to the polishing surface, Ra (roughness) < 0.1nm
  • Polycrystalline diamond can maintain its dull mono-crystalline structure by releasing the outer layer, hence will produce the most scratch free surface possible.
  • When applied to the surface of a workpiece (for example, the inner surface of a cylinder in an engine) via chemical plating method, the wearability of the surface is superior to that of a surface treated with any other materials.
  • Via after-sinter technique, polycrystalline diamond micro-powder can be turned into polycrystalline diamond particles of a large size that are highly valuable in a variety of industries.

Application

  • Lapping and polishing a variety of surfaces that require superior smoothness.
  • Improving the wearability of a mechanical component
  • Via after-sinter technique can be applied in a variety of industries.
  • Can be made into liquid abrasives, gel abrasives, and many other types of abrasive tools that are capable of ultra-fine lapping and polishing tasks.

Industries

  • Computer industry: Read/Write head lapping, rigid disk media texturing
  • Gem polishing
  • Semi-Conductor, electronic ceramic, optical instruments
  • Used as anti-wearing media in special rubber and plastics
  • Chemistry catalyst, Biomedicine
With more than 20 years experience, E-Grind is a professional polycrystalline diamond micro powder supplier and manufacturer, we provide all sizes of Poly (Polycrystalline diamond micron powder) with high removal rate, superior surface finishing, and long using life. Our Quality Control Department keeps strict and careful control of raw material from lot to ensure quality basis. All the products are tested during production and after processing, to make sure of quality consistency and quality traceability. The test report is attached to each shipment for customers reference.

Available Sizes:
0-0.15, 0-0.2, 0-0.35, 0-0.5, 0.25-0.35, 0-1, 0-2, 2-4, 3-6, 3-7, 4-8, 4-9, 6-10, 6-12

Custom-made sizes are also available upon customers'  demand.
Leave a Message Email Us

we will contact you within 24 hours.

Explore More Diamond Powder Porducts

  • Resin Bond Mesh Diamond

    Resin Bond Mesh Diamond

    February 12, 2018Friable DiamondEach Particle is with subcrystal structure. Irregular and Very rough surface.view
  • Metal Bond Micron Diamond

    Metal Bond Micron Diamond

    February 12, 2018E-Grind's metal bond micron products offer good Roughing, Lapping and finishing results.view
  • Diamond Wire Drawing Die Blanks

    Diamond Wire Drawing Die Blanks

    February 12, 2018E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series.view